Heat Pump Upgrades in Ohio: What to Check Before You Start
A heat pump can heat and cool an Ohio home with one system, and some programs may help with the cost. Before you sign a contract, work through this checklist: what your utility offers today, the cold-weather ratings, the sizing, the quote and the paperwork.
See if you qualify โ
Published November 8, 2026 ยท Ohio Energy Rebates guides ยท Program details change; check current terms with your utility.
Federal homeowner credits 25C and 25D are not available for property placed in service after December 31, 2025. Ohio's federally funded Home Energy Rebates (HOMES and HEEHR) have not launched: the Ohio Department of Development submitted its program application to the U.S. Department of Energy on November 12, 2024 and is awaiting approval, so no applications are open. Heat pump help through Ohio utilities is limited and mostly income-qualified: AEP Ohio's HELP program, which can include heating and cooling equipment, says applications are paused for 2026. Confirm current utility terms before committing to work.
Sources: IRS: 25C, IRS: 25D, Ohio Department of Development: Home Energy Savings Program, AEP Ohio: HELP program.
Why heat pumps need extra planning in Ohio
A heat pump moves heat rather than making it, which is why it can both heat and cool a home from one outdoor unit. Ohio is a heating-dominated climate: winters from Cleveland and Toledo down to Columbus, Dayton and Cincinnati bring long stretches below freezing and occasional deep cold snaps, and most homes heat with natural gas today. That makes equipment choice, sizing and backup heat more important than in milder states.
It also helps to be realistic about incentives. Since Ohio House Bill 6 ended the state's utility efficiency mandate after 2020, broad heat pump rebates from Ohio utilities have largely disappeared, and the federal tax credits ended for installations after 2025. The help that exists today is mostly income-qualified. Use the checklist below before you sign anything. It is written for homeowners replacing a furnace, boiler, central air conditioner or an older heat pump, and for anyone adding a ductless system to a room that is never comfortable.
1. Check what your utility offers today
Start with the distribution utility on your bill, not the retail supplier. AEP Ohio's High Efficiency for Low-income Program (HELP) can include heating, ventilation and cooling equipment for households at or below 300% of the federal poverty guidelines, but its page says applications are paused for 2026 and will reopen this fall for 2027. Duke Energy Ohio's Weatherization program for income-qualified customers lists heating system tune-ups, cleaning and repair. Columbia Gas of Ohio's WarmChoice and the state's Home Weatherization Assistance Program cover furnace repair or replacement for eligible households rather than new heat pumps. AES Ohio's efficiency programs ended in 2020. FirstEnergy's Ohio home page currently lists an income-qualified smart thermostat program and Community Connections weatherization. On any program page, note: whether it is open, the income rules, which equipment it covers, whether an assessment or an authorized contractor is required, and any deadline. Our Utility Programs page links every utility, and the AEP Ohio vs FirstEnergy vs Duke vs AES guide compares them.
2. Decide what kind of heat pump fits the house
- Ducted air-source heat pump. Replaces a central furnace and air conditioner using the existing ducts. The ducts need to be in reasonable condition and sized for the airflow; a contractor should test or inspect them.
- Ductless mini-split. One outdoor unit with one or more wall or ceiling heads. Good for additions, finished attics, sunrooms and older homes without ducts, which are common in Ohio's older neighborhoods. Multi-zone systems need careful sizing per head.
- Cold-climate models. Equipment designed to keep heating capacity at low outdoor temperatures. ENERGY STAR explains the categories and what the ratings mean on its air-source heat pump page. In Ohio, ask the contractor how the unit's capacity and efficiency hold up at the winter design temperature for your area, not just at the rating point.
- Dual-fuel or hybrid. A heat pump paired with an existing gas furnace as backup. This is a common choice in Ohio because the furnace takes over in the coldest weather. Ask how the system decides when to switch.
3. Confirm the ratings and the certificate
Heat pump efficiency is listed as SEER2 (cooling), HSPF2 (heating) and EER2, and any program sets its own minimums. Every quote should name the exact outdoor and indoor model numbers, and you (or the contractor) should look the matched combination up on the AHRI Certification Directory and keep the certificate. Programs that offer incentives usually ask for the AHRI reference number, and a mismatched indoor unit can change the ratings. Our Heat Pump Rebates page lists the ratings to ask about in more detail.
4. Insist on a load calculation, not a rule of thumb
Ask for a Manual J load calculation for the house (or the zone) and a Manual S equipment selection. "Same size as the old one" is the most common sizing mistake: the old furnace was probably oversized, and a heat pump that is too large short-cycles, dehumidifies poorly in a humid Ohio summer and wears out sooner. If you plan to add insulation or air sealing, do that first or make sure the calculation reflects it, because a tighter house needs a smaller system. The Insulation and Air Sealing page explains how weatherization fits with equipment upgrades.
5. Plan the backup heat and the electrical work
Most all-electric installations include supplemental electric heat strips for the coldest days, and the control settings for when they come on affect your bill more than almost anything else. Ask how the thermostat will be configured and whether the system "locks out" backup heat above a set outdoor temperature. With a dual-fuel system, ask at what outdoor temperature the furnace takes over. Also check the electrical panel: a heat pump, its air handler and the strips may need new circuits, and some older homes need a panel upgrade. Make sure the quote includes the electrical work, the condensate drain, the pad or wall bracket and any refrigerant line replacement, so there are no add-ons later.
6. Read the quote the way a program will
- Model numbers for every component, with the AHRI number.
- Any incentive shown as its own line, with the program it comes from.
- Permits and inspections included (check what your city or county requires for mechanical and electrical work).
- Commissioning: refrigerant charge verified, airflow measured, thermostat settings documented.
- Warranty terms for parts, compressor and labour, and who registers the equipment.
- Removal and disposal of the old equipment.
Compare at least two quotes on the complete scope. A lower price that leaves out the electrical work or the permit is not lower. See HVAC Rebates and Eligibility for the general equipment checks.
7. Keep the paperwork
Typical requirements for any incentive, warranty claim or future sale: the itemised invoice marked paid, the AHRI certificate, model and serial numbers, the installation date, your utility account number, and proof that the contractor is authorized by the program if that is required. Photograph the data plates on the outdoor and indoor units before the installer leaves. Our How to Apply page has a step-by-step list, and How to Qualify explains what programs look at.
8. Know what is not available right now
Two things homeowners often count on are not currently open. The federal homeowner tax credits 25C and 25D are not available for property placed in service after December 31, 2025 (see the IRS 25C page). Ohio's federally funded Home Energy Rebates, which were planned to include heat pump incentives through the High-Efficiency Electric Homes Rebate (HEEHR) program for income-qualified households, have not launched and their final rules have not been published; the Ohio Department of Development says it submitted its application to the U.S. Department of Energy on November 12, 2024 and is awaiting approval. Plan the project on what is open today, and treat anything pending as a possible bonus rather than part of the budget. Our Programs overview tracks what is open, ended and pending.
Quick checklist
- Distribution utility identified and its program page read this week.
- Income-qualified programs checked, if your household may qualify.
- Equipment type chosen (ducted, ductless, cold-climate, dual-fuel) for the house.
- Model numbers and AHRI certificate match any program's minimum ratings.
- Manual J and Manual S in hand; insulation and air sealing considered first.
- Backup heat settings, electrical work, permits and commissioning in the quote.
- Invoices, photos and approvals kept together.
Program terms change. Check current terms with your utility, and confirm in writing anything a contractor tells you about an incentive before you sign.
Considering a heat pump?
Compare the full project cost and the program options for your home before you commit.
